Our bathrooms should smell clean and present a welcoming environment for our homeowners. Hard water can leave ugly red stains, making it look like you haven’t cleaned your toilet for weeks. You don’t have to throw in the towel yet, as there are ways to get rid of those ugly, rusty stains on your toilet, sink, and tub.

These persistent stains may not always be the result of rust in your pipes or water authority’s pipes. These stains may appear over time even if the water is clear and tastes good. If there are a lot subsurface iron deposits in your area, it is possible that the iron is seeping into groundwater. This could potentially lead to porcelain stains.

Tough stain usually occurs after significant contact between rusty water and porcelain. Therefore, you’re more likely see this in areas with standing water such as your toilet bowl.

You might notice a brownish hue around the waterline or streaks that extend down to the bowl’s outlets, this could be rust staining. These can’t be cleaned with regular toilet cleaning and a scrubber.

This is where stains most commonly occur. You may notice brown stains if you have a drip faucet.

It may be necessary to have a local Glendale, CA Plumber assist you in diagnosing and fixing the problem. To stop the flow of rusty drinking water, you’ll need to fix any rusted pipes. A water softening device may be installed to stop the iron-rich water from causing the problem.

The porcelain might become etched from rusty stains over time, so it will be difficult to remove them. These tried-and true remedies are for you if this is something that you can do.

How to Remove Stains from Sinks, Tubs and Toilets

Lemon Juice, Salt and Salt: Start by making a thick paste of lemon juice with salt. Then apply the mixture to the corroded surfaces. Allow the paste to dry over night or for several hours before scraping. Clean the area with a toothbrush and rinse it with clean water.

The pumice stone can be used as a natural and non-scratch alternative to your stained porcelain surfaces. You can simply moisten the stone or the area that is damaged and then gently clean it. A pumice rock will damage fiberglass and should be avoided when working with it. You have other options when dealing with fiberglass stains.

Scrubbing pads: Lighter stains can be removed with a scouring mat and some elbow grease. Any abrasive substance will cause damage to fiberglass and can be used to remove them.

Chemical cleaners: Many chemical cleansers can be used to remove rust stains on sinks, toilet bowls, or bathtubs. This cleansers oxidize rust making it easier for you to wipe the stain off with a damp cloth.

However, these cleaners can leave behind odors that homeowners with small children or pets would prefer to avoid.