Few things are as perplexing as a toilet that seems to have taken on a life of its own, running endlessly. While we’ve discussed some typical culprits, let’s dive into less obvious reasons your toilet might be on an endless loop.
1. Misaligned Float:
The float, which rises with the water level and signals the fill valve to shut off, can sometimes get out of position.
Advice: Gently bend the float arm to adjust its height. The water should stop filling about an inch below the overflow pipe.
2. Old or Poor-Quality Parts:
Over time, internal toilet components degrade. Subpar parts can break down faster.
Advice: Always opt for quality replacement parts. They may cost a bit more upfront but will save you in long-term repairs.
3. Cracked Overflow Tube:
The overflow tube ensures the tank doesn’t overflow. If it’s cracked, water may continuously flow into it.
Advice: Inspect the tube for cracks. If you find any, it’s time for a replacement.
4. High Water Pressure:
Too much water pressure can interfere with the toilet’s internals, causing it to run constantly.
Advice: Test your home’s water pressure using a gauge. If it’s too high, you may need to install a pressure-reducing valve.
Conclusion:
There’s a certain satisfaction in solving the mystery of a running toilet. Whether it’s a simple flapper adjustment or addressing high water pressure, getting to the bottom of the issue ensures peace, quiet, and savings.